Ramsey Electronics FZ-146 Specifications download pdf (Page 116)

FX 146 • 116

 H2: R69, 1K (brown-black-red).

 H3: R114, 1K (brown-black-red).

 H4: R65, 1K (brown-black-red).

 H5: R67, 10K (brown-black-orange).

Install the following diodes, be sure to orient the cathode banded end

correctly. (Diodes are type 1N914/1N4148):

 H6: D19

 H7: D15

 H8a: D13

 H8b: D14

 H9: D16

 H10. Install NPN transistor Q15, type 2N3904. Watch correct orientation

of the flat side.

Notice that a total of 33 identical 100K resistors (brown-black- yellow) are to

be installed in two rows for the two diode matrix areas of your transceiver. If

the 100K resistors provided in your kit have pre-shaped and trimmed wire

leads, simply press them into place and solder both ends. If the 100K

resistors are supplied in the more usual style of a taped strip, all you need to

do is work out your own mass-production procedure to get the resistors in

place as illustrated. There is no right, better or best way other than the need

for clean soldering practice.

 H11-21(a). Install the 14 100K resistors (brown-black-yellow) required

for R91-R101 and R116-118. Plan careful soldering procedure and

install the parts.

 H22-40(a). Install the 19 100K resistors (brown-black-yellow) required

for R71-R89. Once again plan careful soldering procedure and install the

parts.

R118

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 144 145

No comments

Ramsey Electronics FZ-146 Specifications Page 116