Ramsey Electronics QRP-80 Instruction Manual download pdf (Page 5)

QAMP-80 • 5

PARTS LIST FOR THE QAMP-80 QRP POWER AMPLIFIER

CAPACITORS:

[ ] 1 100 to 220 µf electrolytic capacitor [C1]

[ ] 1 10 µf electrolytic capacitor [C2]

[ ] 4 .1 µf disc capacitor (marked .1 or 104) [C3,8,10,13]

[ ] 2 560 ρf disc capacitor (marked 560 or 561) [C4,7]

[ ] 2 1200 ρf disc capacitor (marked 1200 or .0012) [C5,6]

[ ] 2 .001 µf disc capacitor (marked .001 or 102 or 1000) [C11,12]

[ ] 1 .01 µf disc capacitor (marked .01 or 103 or 10 nf) [C9]

RESISTORS:

[ ] 3 1 K ohm resistor (brown-black-red) [R1,5, TP1]

[ ] 1 6.8 K ohm resistor (blue-gray-red) [R2]

[ ] 2 10 K ohm resistor (brown-black-orange) [R3,12]

[ ] 1 470 ohm resistor (yellow-violet-brown) [R6]

[ ] 1 100 K ohm resistor (brown-black-yellow) [R7]

[ ] 2 100 ohm resistor (brown-black-brown) [R8,9]

[ ] 1 51 ohm resistor (green- brown-black) [R10]

[ ] 1 2.2 K ohm resistor (red-red-red) [R11]

[ ] 1 5 K potentiometer (marked 502M) [R4]

SEMICONDUCTOR DEVICES:

[ ] 1 Zener diode, 6.2 volt (gray body with black band) [D1]

[ ] 2 1N4148 type signal diode (glass body with black band) [D2,3]

[ ] 1 1N4002 style black epoxy diode [D4]

[ ] 2 Power MOSFET transistor (marked MTP3055E) [Q1,2]

[ ] 2 2N3904 NPN transistor [Q3,4]

[ ] 1 221334 PNP transistor [Q5]

OTHER COMPONENTS:

[ ] 1 Relay DPDT 12 volt [K1]

[ ] 1 PC mount pushbutton switch [S1]

[ ] 2 RCA style PC mount phono jacks [J1,2]

[ ] 1 2.5 mm DC power jack [J3]

[ ] 2 Heatsink [HS1,2]

[ ] 3 Yellow toroid coil core [L1,2,3]

[ ] 1 10 µH inductor [L4]

[ ] 1 2 hole small ferrite transformer core [T2]

[ ] 1 2 hole large ferrite transformer core [T1]

[ ] 4’ #22 enameled magnet wire (thick wire) [for winding T1,2]

[ ] 8' #24 enameled magnet wire (thin wire) [for winding L1,2,3]

[ ] 2 4-40 x ¼” machine screw

[ ] 2 4-40 hex nut

REQUIRED, NOT SUPPLIED:

[ ] Ramsey case, knob and panel set, Ramsey part no. CQRP

[ ] Matching input and output cables to existing QRP transmitter

[ ] 12 volt DC power supply 3 amp rating

[ ] Proper dummy load or resonant antenna

1 2 3 4 5 6 7 8 9 10 ... 18 19

Comments to this Manuals

No comments

Ramsey Electronics QRP-80 Instruction Manual Page 5

Comments to this Manuals