Ramsey Electronics RR1 User Manual

RR1 • 1 Ramsey Electronics Model No. RR1 Have you ever been so frustrated with the range of your remote that you go to the extreme of rearranging

RR1 • 10 RR1 REMOTE REPEATER KIT ASSEMBLY Assembly of the RR1 is straight forward but it does require some time and patience. To get our bearings, we

RR1 • 11  10. Install J2, the 2-pin header. It is a tight fit so make sure the pins are through the holes before trying to solder them.  11. Install

RR1 • 12 Wow that was fast! 20 steps for something as neat as this may not seem like a lot, but we are almost done building the kit! Take a moment to

RR1 • 13 TESTING THE RR1 To begin testing the RR1 we will need the following items:  AC power supply (6 to 12VAC) or DC power supply (8 to 14VDC). 

RR1 • 14 USING THE RR1 The beautiful thing about it is that there really is no secret to using the RR1. The only option you may need to change is the

RR1 • 15 TROUBLESHOOTING GUIDE PROBLEM: The green LED doesn’t light up when I aim my remote at it. SOLUTION: There are a few things that can go wrong

RR1 • 16

RR1 • 17 RR1 PARTS PLACEMENT DIAGRAM

RR1 • 18 RR1 SPECIFICATIONS: There are only a few specifications that need to be documented for this par-ticular product. Please note that these are s

RR1 • 19 The Ramsey Kit Warranty Please read carefully BEFORE calling or writing in about your kit. Most problems can be solved without contacting the

RR1 • 2 RAMSEY TRANSMITTER KITS • FM100B Professional FM Stereo Transmitter • FM25B Synthesized Stereo FM Transmitter • MR

RR1 • 20 RR1 REMOTE REPEATER KIT Quick Reference Page Guide Introduction ...4 Theory of Operation ...

RR1 • 3 RR1 REMOTE REPEATER KIT Ramsey Publication No. MR R1 Price $5.00 TABLE OF CONTENTS Introduction ...4

RR1 • 4 RR1 INTRODUCTION Welcome to the RR1 kit (and if you don’t have the time, the wired and tested version). Let’s take a moment to help you unders

RR1 • 5 RR1 THEORY OF OPERATION The RR1 may look simple but there is actually quite a lot being done inside each one of the parts. Many individual com

RR1 • 6 of the one second time frame (0.60 seconds total of the entire second). For a logical zero, the LED will still be switched on and off at a rat

RR1 • 7 RAMSEY “LEARN-AS-YOU-BUILD” ASSEMBLY STRATEGY Be sure to read through all of the steps and check the boxes as you go to be sure you didn&apo

RR1 • 8 This project will not work as well as you may wish if you just slap it together without following good assembly techniques and all of the inst

RR1 • 9 PARTS SUPPLIED WITH YOUR RR1 KIT Capacitors  3 0.1 uF ceramic capacitors (marked .1 or 104 or 100 nF) [C2,3,4]  2 10 uF electrolytic cap